Gould & Eberhardt Model 96G CNC Gear Gashing machine for both Internal & External gears , slew rings and Bearings

GOULD & EBERHARDT CNC Gear Gashing Machine
Model 96-G  completely remanufactured and retrofit 2021

This G&E Gear Gashing machine was completely Remanufactured to cut both
External and Internal diameter Gears and Splines. This machine was
completely remanufactured professionally through our extensive
remanufacturing process. The machine was also manufactured with new slide
machined and fit to utilize and run the NEW G&E Designed Gashing heads. 
All of our newly designed heads will fit on this remanufactured machine.
See details below!!

Note: The machine has been Re-manufactured with all new Ballscrews,
hardened and ground ways, new hydraulics and brakes for the table along
with new head slide, perfectly fit to receive New heads and control of your
choice.

Machine Capacities: For G&E Model 96-G (3-Axis) CNC SPUR Gear Gasher
Max Gear Diameter Ext................................100"
Min Gear Diameter Ext................................18"
Max Face width Ext...................................55"
Max Internal Gear Diameter...........................100"
Min Internal Gear Diameter...........................32"
Max Pitch Ext........................................1 DP
Max Pitch Int........................................1.5 DP

Machine Specifications and dimensions:
Diameter of work Table 80"
Bore Diameter in Work Table 23"
Maximum load on Table 80,000 lbs
Table worm Gear Diameter 76"
Number of Teeth inf variable
Power requirements 480V 3 Phase, 60Hz
Pneumatic requirements 80 CFM at 90 PSI

G&E Gasher with Standard Equipment:
New Fanuc  or Siemens controller with motors and drives & gashing Software
Oil Recirculation w/ filtration
Oil Chilling System
Split 2-Piece table/ Stanchion Design
Single Stanchion machine assembly

Control Features
* C-Axis  (Work Table Rotation)
* X-Axis  (Radial Infeed)
* Z-Axis  (axial Feed)
* Fanuc Spindle motor for Cutter Rotation

Programs Feature:
- Custom Macro Screens for Easy Conversational Programming
- 1 - 3 Cut cycle programming
- Crowning amounts are input by the desired amount on the flank of the gear
- Single Index Milling 
- Programmable Taper
- Sizing cycle Feature (allows you to cut small numbers of teeth to make
corrections)
- RS-232, S Ram Card storage and Ethernet ports

Machine can be equipped with the following Gashing Heads:

Optional  External gashing Head
(4.1) G&E Standard External Gashing Head
With 40 KW Spindle Motor

Head Capacities:
Maximum Gear Diameter 200"
Maximum Pitch Gashing 1 DP
Maximum shift Tangential 0"
Maximum Cutter Diameter 18"
Maximum Cutter Width 5"
Maximum Spindle speed 0-125 RPM

Optional Internal Gashing Head
(5.2) G&E Standard Internal Gashing Head
Utilizing same 40 KW  Spindle Motor,
w/ Direct Hook up with Quick Change Features

Internal Head capacities:
Minimum internal Gear Gear Clearance 32"
Maximum tooth pitch 1.5 DP (17 Mod)
Maximum Face width 14.2"
Maximum Throat Distance 17"
Spindle speed 0-125 RPM
Maximum cutter Diameter 16"
Maximum Cutter Width 90 mm

EXTERNAL & INTERNAL HEADS CAN BE SUPPLIED AT ADDITIONAL COST (Inquire)
External 4.1 Gashing Head Price  ($225,000. USD)
Internal 5.2 Gashing Head Price  ($275,000. USD)

Price includes your choice of either an external or internal head.
Test run-off at Piselli Ent location & loading on customers trucks.

Installation can be quoted based on a pit or floor mount positioning and/or
as a complete job or on an hourly basis. Customer is responsible for all
rigging, unloading, foundation work, cat walk or any other safety measures
deemed necessary. Piselli Enterprises would quote for supplying the labor
for completing the machine wiring, hook-up, and final installation, once
machine is properly placed in its final position by customer.
Piselli enterprises can also quote the Operator training as well on site.

Customer is responsible to supply all parts, tooling and blanks for its
run-off. If nothing is available from customer then Piselli Ent will supply
and charge customer back for tooling and any additional charges.

Terms:
40% down with order
50% upon runoff at Piselli Ent.
Balance of 10% 15 days after shipment and or 30 days after installation if
Piselli ent is contracted to install machine IN USA Location.

Original foundation drawings and manuals are also included with machine
purchase.

Please contact us to discuss your particular parts you require as we are
happy to work with you in assisting with acquiring the proper tooling for
your work.