NAGEL ECO 40

This Nagel Twin Spindle Precision Honing machine has been designed for the
production shop for both high and low production requirements.
Nagel designs precision Diamond and CBN tooling to manufacture perfect bores
for those high quality requirements. The machine can be set up for auto or
manual loading and comes equipped with special gauging for post process.

Specifications are as follows:
workpiece bore sizes...............................................3-40 mm
Max workpiece Depth.................................................200 mm
Max part height....................................................1000 mm

Spindle Speeds................................................100-1700 RPM
Spindle Drive (A B Servo)...........................................4.5 HP
Number of spindles available.......................................up to 3 

Oscillation Spindle stroke..........................................400 mm
Oscillation Speed..................................................30m/min
Oscillation Spindle Drive (Ab Servo)................................2.7 HP

Machine dimensions H x W x L.........................2750 x 1310 x 1260 mm
Power requirements...............................480/ 50/60 HZ 3 phase a/c
air requirements......................................60 PSI line pressure

Machine is equipped with the following:
Allen Bradley windows based HMI
In process gauging
post process gauging
auto tool wear compensation
Rotary index table
SPC
Coolant tank and filtration 
books and manuals

Note: this machine came from a plant that closed down. It was set up on a
central coolant system and was loaded with a simple robot. the cables to
install another robot are still on the machine. Machine can be loaded
manually as well.