.jpg)
Muratec Model MW120 CNC twin spindle CNC Turning centers. Single gantry machines with 8" chucks and tooling. Machines are new in 2005 , no part stackers or loaders as they were gantry fed by overhead gantry system. 2 available located in statesville NC
Muratec Twin Spindle CNC turning machines Model MW 120 New 10/ 2005 s/n 1191 & 1193 Excellent condition These 2 Muratec Model were set up in customers plant and were fed by an overhead gantry system. the system for loading the parts did not require loaders or stackers. These stackers would need to be added if no loading system is available. machine specifications are as follows: Distance between spindles 340 mm Max Swing 295 mm chuck size 205 mm Max diameter w/ Loader 120 mm Max diameter without Loader 230 mm Number of turret stations 8 Stroke - X-axis radius 130 mm - Z-axis 145 mm Rapid Traverse rate X-axis 24 m/min Z-axis 24 m/min Max spindle speed 4500 rpm Standard tools - Shank size OD tools 20 mm - Max shank diam boring bar 40 mm Machine weight 4400 kg Machine foot print Length x width 1900 mm X 1760 mm Machine is equipped with the following: Muratec / Fanuc pendant controller (2) 8" diameter Howa chucks model Ho11MB8 Single Gantry style machines chip conveyors Gantry load & unload software package and wiring Books and Manuals Note: these 4 machines were set up on a line where an overhead gantry fed the machine and unloaded the machine, Overhead Gantry not included with these machines. Part stackers and unload stations may need to to be added if gantry system or robots are not presently utilized in your facility. These machines look to be in excellent condition . see photos and general condition. ask rich@;piselliEnt.com or view at WWW.Pisellient.com for additional photos and info. Machines are sold as is and as equipped in photos. contact us today to set up an inspection to view the machines at our Statesville NC warehouse.