Gleason model 350 GMM CNC Gear tester , updated software in 2016/17 and New Renishaw SP80 probe 1 available

Gleason CNC Gear Testers
Model 350 GMM s/n 6258
1 Available in excellent condition
Equipped as photographed
Updated in 2016/17 with Renishaw SP-80 probe system and latest version
of Gamma 2.3 software (see Screen shot for actual info)

Machines to be properly secured by Gleason factory technician for
transportation , machines to be secured on special built crates
for shipping.

Machine specifications are as follows:
• Machine construction using a granite base designed for production use
• Probe Resolution 0.03 m
• 3 Linear motor driven axes and Rotary drive rotary C-axis
• X travel probe horizontal travel 270mm (10.6”)
• Y travel horizontal movement measuring slide 480mm (18.9”)
• Z travel vertical movement of measuring slide 480mm (18.9”)
• C-axis- Rotary Table Diameter 228mm (9.0”)
• Weight Capacity 180kgs (400 lbs.)
• Maximum diameter of part 305mm (12”)
• 1 Motorized tailstock with a live top center 18 mm
• Maximum length part between centers 760mm (29.9”)
• Standard probe ball stylus 3.0 mm
• Precision Calibration Sphere 19.05mm and 12.7mm
(For calibration of probe tips and table center find location)
• bottom dead centers 25mm
• Optional centers available 54.5mm and 75mm
• Power Requirements 110VAC, 20 Amps, 60 Hz
(permissible fluctuation - +/- 15%) 220VAC, 20 Amps, 50 Hz
• Environmental Temperature 20.1+/-2.0 C (68+/-3.0F)
• Approximate Machine Weight 1300Kg, (2,860lbs), approx.

Software package as originally purchased by owner from Gleason M & M
License Type (see screen shot) Full License
Enabled Features:
Compare
Journal Reference
Topography
Straight Sided Spline
Keyway
DIN 5480
JIS 1702-1998
ANSI B92 (Default Option)
Unknown Gear
Qdas
Gearnet
Dual Helix (Default Option)
JIS1702 1976
INDEX ECCENTRICITY REMOVAL
CHINA GB 10095-1998 Analysis
CHINA GBT 10095-2001 Analysis
DIN 3960/62 (Default Option)
ISO 1328-1995
Root Scan
GM ISO Analysis

Machines are Equipped with
GAMA 2.3 software latest version updated in 2016! (see screen shot)
updated with Renishaw model SP-80 Probes
full manuals and documentation
SP-80H probe Kit
Master Sphere Ball
misc software and tooling & Manuals
machine pads
etc.

Note: New licensing software fee for new owner is Required for $17,500 if
machine Needs to be serviced by Gleason . This Fee needs to be purchased
directly from Gleason Metrology!

contact Rich Piselli at 704 609-0766 or rich@pisellient.com
or you can visit WWW.PiselliEnt.com to see our extensive Gear
Machine Inventory