Sold

Gleason Model 104 Coniflex gear generating machine., for straight bevel Gears Rebuilt 2021

BEVEL GEAR GENERATORS STRAIGHT
Manufacturer:
GLEASON
Model:
104 'CONIFLEX'
Condition:
Used - Rebuilt
Stock #:
16633820
Gleason Model 104 Coniflex Generating style gear cutter for straight bevel gears . 8.5 " maximum diameter gear, 3 dp, Excellent condition , Rebuilt 2021 work completed 6/28/21.

Gleason Straight Bevel Coniflex Gear Generator
Model 104 s/n 29302 Partially rebuilt
Machine is in Excellent condition

This machine Has been gone through by our technician. we have
Rebuilt spindles along with other items on this machine.
It is in excellent working condition and can be viewed as such
general machine specifications are below. Contact us for a full
report on work completed on this machine

CATALOG SPECIFICATIONS:
CONE DISTANCE(MAXIMUM)................. 4.25" (108MM)
CONE DISTANCE(MINIMUM)................. 0"(0MM)
PITCH ANGLE(MAXIMUM) 90 DEGREES........ 84DEGREES 18 MIN
PITCH ANGLE(MINIMUM)................... 5 DEGREES 42 MIN
EXTREME ANGLE (MINIMUM)................ 10:1
PITCH DIAMETER (MAXIMUM) RATIO 10:1.... 8.5" (216MM)
PITCH DIAMETER RATIO 1:1............... 6"
DIAMETRAL PITCH(COARSEST).............. 3DP (8.5 MODULE)
DIAMETRAL PITCH(FINEST)................ 20 DP (1.3 MODULE)
PITCH DIAMETER (MINIMUM) RATIO 1:1..... 6" (152MM)
DIAMETRAL PITCH (COARSEST)............. 3DP (8.5 MODULE)
DIAMETRAL PITCH (FINEST)............... 20 DP (1.3 MODULE)
FACE WIDTH (MINIMUM)................... 1-3/8" (35MM)
INDEX RANGE....................... 9-93 INCLUSIVE & MOST NO. S TO M175
PRESSURE ANGLES (DEGREES).............. 22,22.5,25 DEGREES
WORK SPINDLE TAPER HOLE (LARGE END).... 3-39/22" (100MM)
WORK SPINDLE TAPER PER FT.............. 39/64" (15MM)
DEPTH OF TAPER......................... 6"
SPINDLE HOLE DIAMETER THRU-BORE........ 2-7/16" (62MM)
SPINDLE NOSE TO MACHINE
CENTER................................. 1-1/2" TO 9" (3831-228.6MM)
CUTTER SPEEDS (FEET PER MIN)........... 98 TO 286
FEEDS (SECONDS PER TOOTH).............. 4.2 TO 69.2
MAIN MOTOR............................. 5HP 1800 RPM
HYDRAULIC PUMP MOTOR................... .75HP 1800RPM
COOLANT PUMP MOTOR..................... .5HP 3600RPM
FLOOR SPACE............................ 61.25"X84.25" (1556X2140MM)
MACHINE NET WEIGHT..................... 14,500 LBS (6.591 KGS)

Machine is equipped with the following
1 set up of change gears presently 0 the machine
1 set of cutter bodies for the machine
machine guarding (not photographed but included)
manual for operating machine and electrical drawings

contact us today as this machine will not last !!

This machine is equipped as photographed and as inspected. it was
partially rebuilt by our technicians in our statesville facitlity .
A complete work up of repairs done to this machine is available upon
request and full disclosure of work completed is available for review
upon inspection. Call us to discuss an inspection or schedule a visit,
got to WWW.PiselliEnt.com for more photos and/ or information on this
or other machine options

Loading...
Loading...
Loading...
Loading...