Mollart 3 spindle CNC GUN DRILL
Model OMNISPRINT
s/n A304/1-1197
**Reconditioned !!!
MOLLART OMNISPRINT 3 SPINDLE CNC GUNDRILL knee type
S/N A304/1-1197
SPINDLES 3
DRILL DIA. 0.118 " TO 1/2"
MAX DRILL DEPTH 30"
X AXIS CROSS TRAVEL 19.69"
YAXIS VERT. TRAVEL 9.84"
Z AXIS TRAVEL 31 1/2"
SPINDLE CENTER DISTANCE 9.84"
WORK TABLE 25 1/2" X 25 1/2"
SPINDLE CENTER HEIGHT FROM TABLE 4.61" TO 14.84"
A.C.SPINDLE MOTOR 3.7KW OR 5HP.
SPINDLE SPEED INFINITE O-TO 10500 RPM
X & Z AXIS RAPID TRAVERSE 394" IPM
Y AXIS RAPID 157 IPM
machine is equipped with
GE FANUC 18M CNC CONTROL W/ HAND HELD PENDENT
460V 3PH 60HZ power requirement
machine is tooled as photographed
Recondition process:
The machine will be completly dismantled and cleaned, all parts
thoroughly inspected ,defective, worn,or damaged parts replaced.
Bearing and way surfaces cheked if necessary will be hand scraped
or precision ground. Ball screws tested repaired or replaced as
needed. Lubrication system tested. The electrical control system
completly tested and upgraded where necessary. The three drilling
spindles will be rebuilt. The high pressure coolant system will be
reconditioned and filters replaced. The machine will be reassembled
and painted
delivery : 8 weeks from receipt of down payment !!!
visit www.pisellient.com to inspect this machine and our other
extensive inventory options or contact rich piselli at rich@pisellient.com
for more information or delivery information
