Fellows Model 50-8 CNC 6-Axis Vertical HYDROSTROKE gear shaping machine,
Retrofitted in 2005
6-Axis Fanuc 16I-M controls
2 available s/n 35838 & 36605
The original Fanuc 15 M conrtol system has been replaced and
retrofitted with a Fanuc 16i-M 6 Axis "CNC" Controller.
The 6 CNC controlled axis are the following:
(1) work rotation, (2) cutter rotation, (3) stroking speed,
(4) Infeed position, (5) cutter positioning
(6) stroke length
PRINCIPLE SPECIFICATIONS:
Maximum diameter external gear 51.18"
Maximum diameter internal gear 51.18"
Maximum diametral pitch (spur and helical) 2" DP
Maximum face width 8"
Maximum helix angle (with proper guide and 7" cutter) 40 deg
Work table diameter 44-3/32" (1120mm)
Work table spindle bore diameter 11.024 " (280mm)
Maximum load on worktable 11,000 lbs
Maximum distance centerline of cutter spindle
-to centerline of work spindle 30.9"
Minimum distance centerline of cutter spindle
-to centerline of work spindle 3.55”
Clearance Height- Max dist from work spindle face to top of cutter spindle
-in max upper position (with a 150mm, 5.906” riser) 26.5"
Dimensions
- Length 96"
- Height 147"
- Depth 215"
Machine net weight, approx 31,000 lbs
EQUIPMENT FEATURES:
• updated with a Fanuc 16i "CNC"
Controller, with color LCD display in 2005
• The Fanuc CNC controls the following axis:
o Work table rotation (no change gears required)
o Cutter spindle rotation
o Work table infeed
o Cutter spindle stroking speed
o Stroke position
o Stroke length adjustment (from CNC controller, not the top of machine)
• Manual pulse generator-(MPG) can control all six “CNC” axis including stoke length adjustment
• Both work and cutter spindle have rapid rotation for indicating purposes
• Four cut capability selectable for 1-cut, 2-cut, 3-cut, & 4 cut operations with stroking speed, depth feed rate, depth of cut and rotary feed infinitely variable and preset for each cut
• High output, quick return, infinitely variable stroking drive with adjustable return ratios as follows:
o 12 to 500 SPM at 2:1 ratio
o 12 to 300 SPM at 3:1 ratio
• Rotary feed: The custom software on the Fanuc controller allows direct input of rotary feeds for each cut
• Digressive Infeed (infeed per stroke diminishing from a preset high value at beginning of cut to a preset low value at depth)
• Adjustable cutter positioning at top of stroke
• Crowning and taper capability via back off cam
• Complete "Hydrostroke" hydraulic power unit
• Constant pressurized lubrication to all working elements
• Mechanical straight spur guide for cutter spindle (interchangeable with hydrostatic guides without changing or adding any hydraulic equipment)
• Cutter spindle adaptor (will advise)
• Guards, covers, misc. wrenches, spanners, operator tools
• Operators manual, parts list, wiring & hydraulic diagrams
• The machine is wired for 440V 3 phase
• Magnetic chip conveyor
• Fully air-condition electrical cabinet
PROGRAMMED FEATURES:
• CNC controller has Macro screens for “Operator friendly” question and answer setups. No Programming Needed.
• One to four cut selected by CNC controller
• Setups can be stored in nonvolatile memory using a setup number between 1-9999
PROGRAMMED FEATURES: Continued
• Each cut has individual parameters for:
o Depth of cut
o Infeed rate
o Stroking speed
o Rotational feed rate
o Degree of work rotation
PRICE:
For machine and accessory equipment delivered F.O.B.
Truck, Present Plant location
WARRANTY:
to be discussed
TERMS:
50% cash down payment with Formal Purchase Order
40% payable upon machine's delivery.
10% balance Net 30
Contact us today to learn more about this machine offering as we are able
to assist in installation and traing as well. we look forward to working
you on the purchase of this machine. contact rich Piselli at (704) 609-0766
or at rich@pisellient.com . also visit our website www.PiselliEnt.com to
learn more about all of our gear machine offerings in stock and coming in !!!
