Sort By
Select option
Arter Model A-12 Rotary Surface Grinder w/ horizontal spindle for sharpening shaper cutters
ARTER A-12
Used - Excellent
GRINDERS, SURFACE, ROTARY TYPE, (HORIZONTAL SPINDLE)
Stock #: 16633797
ARTERr Model A1-12 Rotary Surface Grinder w/ horizontal spindle and Tilting Table for the sharpening shaper cutters and grinding of other round surfaces
United States
CINCINNATI HEALD 273A
GRINDERS, INTERNAL
Stock #: 4020
Cincinnati Heald model 273A ID Grinder, with 16" 4-jaw chuck excellent shape in tool room, never in production!!
United States
CUDA H20-2840
1999
WASHING EQUIPMENT
Stock #: 4088
CUDA washer Model H20-2840, 28" rotary turn table washer, WASH, HEAT CYCLES, 40" height opening - under sprayers', low water signal, auto cycles, s/n 00599-82724.
Doosan model HC-400 HMC 16" Twin pallet machine w/ Fanuc cnc controls New 2011
DOOSAN HC 400
Used - Excellent
2011
Horizontal Machining Centers
Stock #: 16633792
Doosan model HC-400 HMC 16" Twin pallet machine w/ Fanuc cnc controls , This machine was set up for Facing and centering of shafts on the production line . Fixturing for the machine to do this...
DOOSAN Model Lynx 220LM with fanuc controls , 510mm swing , 51 mm bar cap , excellent new 2011
DOOSAN LYNX 220LM
Used - Excellent
2011
LATHES, TURNING, N/C & CNC
Stock #: 16633791
DOOSAN Model Lynx 220LM with Fanuc controls , 510mm swing , 51 mm bar cap , chip conveyor , 6000 RPM spindle , Hard turn Lathe ,Excellent condition new 2011
Doosan Puma Model 240C CNC Turning machines new 2010 4 available!!
DOOSAN PUMA 240C
Used - Excellent
2011
LATHES, TURNING, N/C & CNC
Stock #: 16633785
Doosan Puma 240C CNC Turning machine . 240 mm Diam capacity . single turret , single spindle & Tailstock. Machine is equipped with Chip conveyor , New 2010 & 2011.Machines have been removed from...
United States
Doosan Puma 240C CNC Turning machine . 240 mm Diam capacity . single turret & Tailstock New 2008
DOOSAN PUMA 240C
Used - Excellent
2008
LATHES, TURNING, N/C & CNC
Stock #: 16633780
Doosan Puma 240C CNC Turning machine . 240 mm Diam capacity . single turret , single spindle & Tailstock. Machine is equipped with Chip conveyor , New 2008. It is being removed from running...
United States
EITEL ASP-25-3-5
1981
PRESSES, STRAIGHTENING
Stock #: 4034
Eitel Straightening Press, model ASP-25-3-5, with Crack detection, 3 anvils, exit conveyor, New 1989.
Empire Bead Blasting machine 36" x 42" like new condition
EMPIRE M-97-560
Used - Excellent
1997
BLAST CLEANING / AIR & SUCTION
Stock #: 4059
Empire Bead Blaster, rotary automatic blaster and combination hand assist. auto up and down three nozzles, tank and complete unit. Like new condition s/n M-97-560.
FASTI FP 60-32/6
2007
BENDERS, PANEL, N/C & CNC
Stock #: 4096
Fasti FP60-32/ 6 CNC Panel Bender 127"' length X .25" thickness, back gauge, pendant control, misc tooling, New 2007.
Geibel & Hotz model RS 600 CU Universal cnc cylindrical grinder with siemens 840D controls New 2003
GEIBEL & HOTZ RS 600 CU
Used - Excellent
2003
GRINDERS, CYLINDRICAL, N/C & CNC
Stock #: 16633756
Geibel & Hotz model RS 600 CU Universal cnc cylindrical grinder with siemens 840D CNC controls, 15" swing x 24" grind Length w/ 30" between centers, Marposs P7 gaging, Pendant control, ...
Geibel & Hotz Model RS600 CU Universal CNC Cylindrical Grinder , siemens 840D control New 2012
GEIBEL & HOTZ RS 600 CU
Used - Excellent
2012
GRINDERS, CYLINDRICAL, N/C & CNC
Stock #: 16633755
Geibel & Hotz Model RS 600 CU Universal Cylindrical grinders , 15" swing , 24" between centers, 20" grinding wheel Diameter x 4" width , Siemens 840D controller and Marposs P7 Gaging , full...
Hercules Model 3P Horizontal MIlling Machine w/ 63" table
HERCULES MACHINE 3P
Used - Good
MILLERS, HORIZ & VERT (COMBINATION)
Stock #: 16633708
Hercules Universal Horizontal milling machine Model 3P with 63" long table horizontal spindle with work support Lots of cutters and tooling
Hey #3 Facing & Centering Machine 6" x 51" capacity , Allen Bradley PLC controls, Auto cycle , New 2003
HEY #3
Used - Excellent
2003
CENTERING MACHINES
Stock #: 16633795
Hey #3 Facing & Centering Machine 6" x 51" capacity , Allen Bradley PLC controls, auto cycle , New 2003
United States
HEY 3
FACING & CENTERING MACHINES
Stock #: 4017
Hey #3 Automatic Facing and centering machine, 6.5" work diam x 72" Length, 21" max swing, tooling, Nice condition.
United States
Muratec Model MW120 CNC twin spindle turning center with part stacker loader , single gantry , nice condition
MURATEC MW120
Used - Excellent
2011
LATHES, TURNING, N/C & CNC
Stock #: 16633790
Muratec Model MW 120 CNC Twinw Spindle turning center with single gantry , twin turrets, part stacker loader and conveyor return . Nice condition under power prior to removal . machines are...
Muratec Model MW200 CNC twin spindle CNC turning centers new 2011
MURATEC MW200
Used - Excellent
2011
LATHES, TURNING, N/C & CNC
Stock #: 16633788
Muratec Model MW 200 CNC twin spindle turning centers. Machines are equipped with loader stacking stations, gauging, single gantrys , w/10" max diameter chuck capability, w/ 2 10 station...
Muratec Model ML 400G CNC Turning machines w/ Tailstocks , single turret and gantry loaders New 2011
MURATEC ML400
Used - Excellent
2011
LATHES, TURNING, N/C & CNC
Stock #: 16633776
Muratec Model ML 400G CNC turning centers . machines are specially equipped with tailstocks, single turret, Gantry loaders, part holders, chip conveyors, to manufacture precision shafts . the...
United States
Muratec Model MW120 twin spindle single gantry CNC Turning centers New 2005 (2 Avail)
MURATEC MW120
Used - Excellent
2005
LATHES, TURNING, N/C & CNC
Stock #: 16633723
Muratec Model MW120 CNC twin spindle CNC Turning centers. Single gantry machines with 8" chucks and tooling. Machines are new in 2005 , no part stackers or loaders as they were gantry fed by...
United States
NAGEL ECO 40
HONES, VERTICAL
Stock #: 4050
Nagel Model ECO 40 Twin Spindle CNC Bore Hone. For the MFg of high Precision bores, utilizing both Diamond and CBN Tooling. 40 mm bore cap, 200mm stroke, 1000 part height. Gauging, AB Controls,...
New York, United States
Okuma Model GI 10NII CNC Internal Grinder (ID) Excellent condition New 2015
OKUMA GI-10NII
2015
GRINDERS, INTERNAL
Stock #: 16633808
Okuma Model GI 10NII CNC Internal Grinder (ID) Excellent condition New 2015
United States
Okuma Model GA-26T CNC Angle Head Universal cylindrical grinder , with gauging, Gantry loader new 2008
OKUMA GA-26T
Used - Excellent
2008
GRINDERS, CYLINDRICAL, PLAIN (ANGLE HEAD), N/C & CNC
Stock #: 16633796
Okuma Model GA-26T CNC Angle Head Universal cylindrical grinder , 13" Swing x 14" between centers, 24" diameter grinding wheel , operator Pendant, with gauging, Gantry loader new 2007 Delivered...
United States
Okuma GI-10NII CNC ID Grinder
OKUMA GI-10NII
Used - Good
2013
GRINDERS, INTERNAL
Stock #: 16633789
Okuma model GI-10NII CNC ID Grinder New 2013 Good running condition , inspect under power in customers Plant . Machine is equipped as follows in specifications below!! New 2013
Okuma Model GI-10N CNC ID Grinder , Okuma OSP-U10G controls, auto loader, Precision chuck, Gauging new 2007
OKUMA GI-10NII
Used - Excellent
2007
GRINDERS, INTERNAL
Stock #: 16633772
Okuma Model GI-10N CNC ID Grinder , OSP-U10G controls, automatic loader, Precision chucking system, Gauging, All accessories, new 2007. Excellent condition!
United States
OKUMA GI-20N
Used - Good
1996
GRINDERS, INTERNAL
Stock #: 16633679
Okuma MOdel GI-20N CNC ID Grinder , 15.75" max swing, 7.87" max grinding Length, special work holding chuck, CNC controls , CNC dresser , lots of misc tooling and grinding wheels, New 1996
OKUMA & HOWA 25H-2SP
Used - Good
1997
TURNING MACHINES, N/C & CNC
Stock #: 391716
Okuma & Howa, Model: 25H-2SP, CNC Twin Spindle Turning Machine, Fanuc 18 controls, with 2 Precision 12" chucks, Chip conveyor, New 1997 .
North Carolina, United States
Sanyo Model 4MP-1H Piercing Machine, high speed punching of small holes 2008
SANYO 4MP-1H
2008
PIERCING MILLS
Stock #: 385216
Sanyo Model 4MP-1H Piercing Machine, w/Fanuc Powermate Control., Auto Loading, high speed punching small holes 2008.
North Carolina, United States
IMT Tacchella Proflex 3 CNC ID/OD Grinder 1000 mm cap, w/ Siemens controls , gauging , etc, Del New 2012
TACCHELLA Proflex 3
Used - Excellent
2012
GRINDERS, INTERNAL
Stock #: 16633793
IMT Tacchella Proflex 3 CNC ID/OD Grinder , Max distance between centers is 1000 mm , w/ max diam of 300 mm , w/ Siemens controls , gauging , etc, Delivered New 2012
THOMPSON 3B
GRINDERS, SURFACE, RECIPROCATING TABLE, (HORIZONTAL SPINDLE)
Stock #: 4102
Thompson Horizontal surface grinder Model 3B, vertical spindle type 12" x 40" magnetic chuck, 12" wheel diam x 1-1/2" wide, 8" max under the wheel, New mag controls, coolant tank, accurate...
WHEELBRATOR NO.1-A SPECIAL
1978
SHOT BLAST/PEENING, AIRLESS
Stock #: 392616
Wheelabrator-Frye, Shot Blast and Peening Machine, Model No.1-A, Multi-Table, 13" tables with External Blast Cabinet, new 1978
North Carolina, United States