Gleason Model 600HTL CNC Turbo Lapper for hypoid gearing , 24" Diam cap New 2001 Excellent

Gleason Phoenix CNC Turbo Lapping Machine
Model 600 HTL
S/N 948412 Mfg March. 2001 , Delivered 2001

Machine has come from a large spiral bevel gear mfg which manufactures some of
the highest quality ring and pinion sets for its own product line. This machine
is coming out of running service cutting the Corvette Ring & Pinions as the program
has ended. the company follows a strict PM maintenance. A true leader in high quality
Gearing.

Machine Specifications are as follows:

PRINCIPAL SPECIFICATIONS:

Maximum Gear Outside Diameter 23.6” (600mm)
Maximum Pinion Outside Diameter 10” (254mm)
Max Pinion Drive Speed 3100 rpm
Maximum Gear Drive Speed 3100 rpm
Offset range 3” (76mm)
Pinion Cone Range 6.5 to 14” (165 to 356mm)
Pinion spindle bore (large end) 3-29/32" (99.2mm)
Pinion spindle bore, (taper per ft) 39/64" (15.478mm)
Work spindle bore, (large end) 2-19/64" (58.34mm)
Work spindle bore, (taper per ft) 1/2" (12.7mm)
Gear Cone Range 3.5 to 10.5” (89 to 267mm)
Lapping Torque Load 15 to 215 in-lbs (2 to 22 Nm)
H (Pinion Cone) Servo Drive Motor 4.4 ft.-lbs (6 Nm)
V (Vertical Offset) Servo Drive Motor 8.9 ft.-lbs. (12 Nm)
G (Gear Cone) Servo Drive Motor 4.4 ft.-lbs. (6 Nm)
A (Pinion Spindle) Servo Drive Motor 18.8 HP (14 kW)
C (Gear Spindle) 18.8 HP (14 kW)
Machine overall length ………………………………… 93” (2400mm)
Machine overall width …………………………………. 83” (2108mm)
Machine overall height ………………………………… 82” (2083mm)
Machine approximate net weight …………………….. 12,500 lbs. (5,670 kGs)

EQUIPMENT / FEATURES:

• GE-FANUC 160i-M CNC control with motor and drive package
* Turmoil chiller model 0CN-75 R CTC s/n 7659-01
• minimized keystrokes and software navigation via the use of
main operator’s panel push-buttons to execute common commands
(such as “drive”, or “coast” set-over changes and manual roll-checks)
• direct drive horizontal spindles with optimal dynamic properties
• arrangement for 39-Taper pinion and 14-Taper gear work-holding
• work chamber guarding for 600mm maximum gear diameter
• automatic compound applicator
• power work chamber door
• automatic backlash setting at multiple lapping positions
• automatic run-out determination for both members
• high-speed spin clean
• stack light
• centralized automatic machine lubrication system
• full machine documentation, operator’s manual for machine and controller,
electrical and hydraulic diagrams

Machine can Be inspected under power in Excellent mechanical condition. It was
viewed running in excellent condition in customers plant and Has been moved to
to our warehouse in Statesville NC

Call to set up and inspection today (704) 609-0766 or visit our website at
www.piselliEnt.com to view this and other late model Gear Machinery