1999 GLEASON 600 HTL TURBO LAPPER

Gleason Phoenix CNC Turbo Lapping Machine
Model 600 HTL
S/N 935103 Mfg Dec. 1999 , Delivered 2000

Machine has been come from a large spiral bevel gear mfg which manufacturers some of the highest quality ring and pinion sets for its own product line. This machine is coming out of running service as company continuously upgrades all its equipment and follows strick PM maintenance. A true leader in quality manufacturing to the highest levels.

Machine Specifications are as follows: 

 PRINCIPAL SPECIFICATIONS:

Maximum Gear Outside Diameter   ………………… 23.6” (600mm)
Maximum Pinion Outside Diameter  ………………… 10” (254mm)
Max Pinion Drive Speed  …………………………….. 3100 rpm   
Maximum Gear Drive Speed ………………………… 3100 rpm
Offset range …………………………………………… 3” (76mm)
Pinion Cone Range ………... ………………………... 6.5 to 14” (165 to 356mm)
Pinion spindle bore (large end) ................................... 3-29/32" (99.2mm)
Pinion spindle bore, (taper per ft) ...............................    39/64" (15.478mm)
Work spindle bore, (large end) ................................. 2-19/64" (58.34mm)
Work spindle bore, (taper per ft) ..............................    1/2" (12.7mm)
Gear Cone Range …………………………………….. 3.5 to 10.5” (89 to 267mm)
Lapping Torque Load …………………………………. 15 to 215 in-lbs (2 to 22 Nm)
H (Pinion Cone) Servo Drive Motor …………………. 4.4 ft.-lbs (6 Nm)
V (Vertical Offset) Servo Drive Motor ……………….. 8.9 ft.-lbs. (12 Nm)
G (Gear Cone) Servo Drive Motor …………………… 4.4 ft.-lbs. (6 Nm)
A (Pinion Spindle) Servo Drive Motor ……………….. 18.8 HP (14 kW)
C (Gear Spindle) ………………………………………. 18.8 HP (14 kW)
Machine overall length ………………………………… 93” (2400mm)
Machine overall width …………………………………. 83” (2108mm)
Machine overall height ………………………………… 82” (2083mm)
Machine approximate net weight …………………….. 12,500 lbs. (5,670 kGs)

EQUIPMENT / FEATURES:

• GE-FANUC 160i CNC control with motor and drive package
• minimized keystrokes and software navigation via the use of
main operator’s panel push-buttons to execute common commands
(such as “drive”, or “coast” set-over changes and manual roll-checks)
• direct drive horizontal spindles with optimal dynamic properties
• arrangement for 39-Taper pinion and 14-Taper gear work-holding
• work chamber guarding for 600mm maximum gear diameter
• automatic compound applicator
• power work chamber door
• automatic backlash setting at multiple lapping positions
• automatic run-out determination for both members
• high-speed spin clean
• stack light
• centralized automatic machine lubrication system
• full machine documentation, operator’s manual for machine and controller,
electrical and hydraulic diagrams

Note: Piselli Enterprises has additional tooling which may fit the machine that can be purchased separately. Come view our inventory of Gleason fixtures & collets to see if you can utilize it for our machine or yours.