120/8000-GH DEMO
New - In-Stock
Stock #:
For Sale

Gould & Eberhardt Model 120-GH 3 Axis CNC Gashing Machine, 150" Diam, Can Extend to 8 Meter!! 55" Max Face Width, 1 DP- 1/2 DP. with optional heavy duty head, Fanuc 18I Controls, Demo Machine, LIKE NEW CONDITION!!!! Call for More Info and See additional Head options.


GOULD & EBERHARDT HEAVY DUTY GEAR GASHER Model 120-GH SPECIAL, NEW: 2010, DEMO MACHINE Note:Machine can be Extended to 8 meters with additional purchased options** This Machine has been purchased By Piselli Enterprises Inc. along with all the intellectual property of RP Machine whom originally Purchased G&E in 2005. The machine was manufactured for a particular customer for 2.3 million and order was cancelled in 2010. Machine has been tied up in litigation and now is available for Immediate sale!! This machine Has only been used as a Demo machine and has only cut test parts its entire service life. The machine can be optioned out with a heavy duty External Gashing head  & Spacer to mfg gears up to 8 Meters in diameter. Machine is presently set up to produce Spur gears only for both internal and external gearing. Machine Capacities: Max Gear Diameter.................................150" Max Gear Diameter (w/ optional Spacer)............(320"**) Max Face width.....................................55" Max Internal Gear Diameter.........................155" Min Internal Gear Diameter.........................40" Max Pitch ........................................1 DP Max Pitch (w/ optional 4.3 Head)...................(.75 DP**) Machine Specifications and dimensions: Diameter of work Table 102" Bore Diameter in Work Table 29" Maximum load on Table 50 Ton Table worm Gear Diameter 96" Number of Teeth inf variable Power requirements 480V 3 Phase, 60Hz Pneumatic requirements 80 CFM at 90 PSI G&E Gasher with Standard Equipment: Fanuc 18I- B Pendant Control with Gear gashing Software Oil Recirculation w/ filtration Oil Chilling System Split 2-Piece table/ Stanchion Design Single Stanchion machine assembly Gashing Arbor Chip Conveyor Work Stands Internal Cone for chip evacuation Control Features * C-Axis  (Work Table Rotation) * X-Axis  (Radial Infeed) * Z-Axis  (axial Feed) * Fanuc Spindle motor for Cutter Rotation Programs Feature: - Custom Macro Screens for Easy Conversational Programming - 1 - 3 Cut cycle programming - Crowning amounts are input by the desired amount on the flank of the gear - Single Index Milling  - Programmable Taper - Sizing cycle Feature (allows you to cut small numbers of teeth to make corrections) - RS-232, S Ram Card storage and Ethernet ports Machine is equipped with the following Gashing Head as standard equipment: (4.1) G&E Standard External Gashing Head With 40 KW Spindle Motor Head Capacities: Maximum Gear Diameter 200" Maximum Pitch Gashing 1 DP Maximum shift Tangential 0" Maximum Cutter Diameter 18" Maximum Cutter Width 5" Maximum Spindle speed 0-125 RPM (Optional) Internal Gashing Head (5.2) G&E Standard Internal Gashing Head Utilizing same 40 KW  Spindle Motor, w/ Direct Hook up with Quick Change Features Internal Head capacities: Minimum internal Gear Gear Clearance 32" Maximum tooth pitch 1.5 DP (17 Mod) Maximum Face width 14.2" Maximum Throat Distance 17" Maximum spindle speeds 0-125 RPM Maximum Diameter Cutter 16" Maximum Cutter Width 90 mm (Optional) External Gashing Head (4.3) Modul Heavy duty External Gashing Head ** Head Capacities: Maximum Gear Diameter 320" Maximum Pitch Gashing 0.75 DP Maximum shift Tangential 0" Maximum Cutter Diameter 20" Maximum Cutter Width 5" Maximum Spindle speed 0-125 RPM The 4.3 Head needs to be purchased to be able to cut the larger gears over 200" and up to 8 meter capacity as well as gears with a pitch larger than 1 DP. THESE (Optional) INTERNAL & EXTERNAL HEADS CAN BE SUPPLIED AT ADDITIONAL COST: 5.2 Optional Internal Gashing Head Priced at: $275,000. USD 4.3 Optional External Heavy Duty Gashing Head Priced at: $325,000. USD Machine is presently designed as a Pit Mount machine, where the table is flush with the floor. This machine is being supplied with the Standard External Gashing Head model (4.1) described above as noted. Machine is being sold with all misc tooling & fixtures purchased by customer and fitted for this machine!!! Price includes loading on customers trucks  Installation can be quoted based on a pit or floor mount positioning. It can be quoted as a complete job or on an hourly basis. Customer is responsible for all rigging, unloading, foundation work and cat walk. Piselli Enterprises would quote for supplying the labor for completing the machine wiring, hook-up, and final installation, once machine is properly placed in its final position. Piselli enterprises can also quote the Operator training as well on site.  Machine is sold on a first come basis. Terms -90% down with order and prior to shipment -Balance due 30 days after shipment, or installation if Piselli ent. is contracted to install in USA. Original foundation drawings and manuals are also included with machine purchase. We look forward to discussing the options we have for this machine and know that this proven design will be an excellent addition to any gear shop!

Gould & Eberhardt CNC Gear Gashing Machine , Model 120 GH w/ special optional heads to produce gears up to 8 Meters!!

Gould & Eberhardt CNC Gear Gashing Machine , Model 120 GH w/ special optional heads to produce gears up to 8 Meters!!