Gleason Model 15 Bevel Gear Blank checker with digital readout . Excellent condition

Gleason Bevel Gear Blank checker
Model 15 New 1978
S/N 750305
Excellent condition

This Bevel Gear Blank checker was purchased from and aerospace facility
it can be inspected in excellent working condition

One (1) - Model No. 15 GLEASON Blank Checking Machine
suitable for checking bevel and hypoid gear blanks from
2" (50.8mm) to 15" (381mm) diameter

This is a standard 15 series machine, corresponding to the attached
copy of factory literature
equipped with 2-Axis ACU-RITE Digital Readout unit, and precision dial indicator

PRINCIPAL SPECIFCATIONS:

Diameter of gear blank maximum 15"/(381mm)
Diameter of gear blank minimum 2"/(51mm)
Spindle nose to Crown
(maximum for gears and pinions) 2"/(51mm)
Spindle nose to Crown (minimum for pinions)
Back angle up to 70-degrees 4"/(102mm)
Back angle 70-75 degrees 4.25"/(108mm)
Back angle 75-80 degrees 4.5"/(114mm)
Back angle 80-95 degrees 4.75"/(121mm)
Back angle over 85-degrees 5"/(127mm)
Travel of indicator (face angle) 0 - 90 degrees
Travel of indicator (back angle) 0 - 90 degrees
Maximum length between centers 17.75"/(450mm)
Minimum length between centers 6.5"/(165mm)
Diameter of work spindle bore (large end) 3-29/32"/(99mm)
Spindle Taper per foot 39/64"/(1:20)
Depth of spindle taper 6"/(153mm)
Floor space 22"x 32-11/16"/(560x830mm)
Approx. machine net weight 1,900 Lbs./(860 kGs)

machine is equipped with the following
Accu-rite digital readout for Face & Root

machine can be inspected in our Statesville NC facility
contact us today to visit our extensive inventory of
Gear machinery and equipment. go to WWW.PiselliEnt.com
to view more photos of this machine and information on
all our other inventory. or email Rich@PiselliEnt.com