GEAR HOBBERS (CNC)

Barber-colman/Heartland model 6-16 4-Axis CNC Gear Hobber Retrofit, 6" Diameter x 10" part length. Machine has been set up to do small bronze worm gears. Call for pictures and more details.

Bourn & Koch 200H Series II 6-Axis CNC Horizontal Hobber, 8" Max Diam x 60" Part Length, w/Fanuc 16 IM controller motors & Drives, CNC tailstock , auto clamping , full enclosure , chip conveyor , ...

Bourn & Koch Model 25H 4 axis CNC Horizontal Gear hobber, 1" Max Diam, 1" Max hob Diam, 7" Center distance, taper and crown hobbing, feed and speed changes between cuts, 3000 hob RPM, Num CNC cont...

Gleason Model 200GH 6-Axis CNC Gear hobber , 8" Diameter capacity , Max 4 NDP., Maximum face width 11.81", 20 hp optional spindle, Excellent small footprint machine new 1995/96

Gleason model Phoenix 125 GH w/ Special Hi-helix head for cutting Cam shafts gears and worm shafts of similar profiles . Machines were equipped with hi-helix heads allowing for additional clearance...

Gleason model Phoenix 125GH/ 200 (Extended) 6-Axis CNC vertical Gear Hobber, W/ Optional 8" Diameter software parameters & 20HP spindle motor option , Fanuc cnc controls, delivered new 10/1995, Exc...

Gleason Model Phoenix 125GH CNC 7-axis Gear hobber , Fanuc model 160I-M controls , 180 Position Loader w/ in and out shuttle style loader for small pinions . machine will cut gears in the fastest t...

Gleason Model Phoenix 125 GH CNC Vertical 6-Axis Gear Hobbing machines. this versatile HI-Speed small foot print hobbing machine can cut gears from .25" - 5" Diameter. It is extremely flexible and...

Gleason Pfauter Model P-350 6 Axis CNC Gear Hobber , 16" diameter capacity, Heavy duty Head, Siemens 840D control, Full enclosure Good condition New delivered 2010

Kashifuji Model KN80 6 axis CNC High speed Gear hobber, 80 mm diameter capaity , 4 modul, 200 mm axial feed, Fanuc model 18I-MB controls , New 2005 excellent

Liebherr Model L-402 CNC Gear hobber 16" Diam Cap w/ A/B 8200 CNC controls 3 axis for table , infeed, and z- travel. the machine utilizes change gears for index . Machine has just been removed from...

Liebherr Model L-902 CNC Gear hobber, 35" diameter cap. 2.5 DP, 12 module, 7.5" Diam. Hob, w/ GE Fanuc 16M CNC controls motors & Drives, recontrolled in 1997.

Liebherr model LC-120 6-Axis cnc vertical gear shaper , high speed with loading,Siemens 840-D control , 180 position loader ,new 2003

Liebherr LC-122 6 axis cnc high spped gear hobber. 125mm diameter capacity w/ 180 position loader new 2000

Liebherr Model LC-80 7-Axis CNC Gear hobber W/ 180 Position Loader. 80 mm Max Diameter workpiece. The machine(s) are new in 2005 and were utiiezed with National pick and place loaders. Machines ha...

Liebherr Model LC-122 6-axis CNC Gear hobbing machine, 5" max diameter, 8 DP, 3.5" Diam hob, 2000 rpm, Liebherr LH-90 CNC controls, high speed, full enclosure, magnetic chip conveyor new 1995/96.

Liebherr model LC-282 CNC Gear Hobber, with Auto loading, Dry cutting and / or wet, LH-90 Cnc Controls, Chip Conveyor, inspect under power, excellent condition NEW 2003.

Mitsubishi Model GC-40 6 axis CNC Gear hobber, 16" max diameter gear, 15" face, 6" diam Hob, chip conveyor, Fanuc 16 MB Controls, new Sept 1995 inspect under power.

Mitsubishi model GN20A 6-Axis CNC Horizontal Dry hobbing machine , 8" diameter , fanuc 18 controls , new 1998

Mitsubishi Model GN20A 5 axis CNC (Dry cutting) Hobber , 8" diameter cap. 4.23 DP , Fanuc series 18i-M controls, installed New 2000. Too many featuers to list !!

Modul Model ZFWZ 1200/1600 mm Diam. CNC Heavy Duty Gear hobbing machine w/ heavy duty pinion support and tailstock Remanufactured in 2008 with Fagor cnc controls . Lots of hob arbors and a nice com...

Pfauter Model P400 / 4000 6 axis CNC Horizontal Hobbing machine. the machine has been Retrofit and rebuilt with Fanuc series 18I-MB cnc controls motors and drives in 2006. Machine can be inspected ...

S&T Model GHO-80 cnc 6 axis gear hobber ,200mm diameter capacity, in LIKE NEW CONDITION, Inspect under power never used 2018

Samputensili Model S-100 7 axis CNC Gear hobber, 100mm diameter 80mm tool diameter, High speed Dry hobbing machine w/ lsimple pick and place loader for loading for pinions & Gears, New 2006.

Yunil Model Hera 200 (6-Axis) CNC gear hobber , 200mm diam capacity, 250 mm face width, 2000 hob RPM, 4 DP, Fanuc OI-MD controls , Excellent condition, many features, New 2013 !!