Barber Colman model 16-16 w/ Differential & Downfeed , square and plunge cycle, Nice machine

Barber Colman Horizontal hobbing Machine
Model 16-16 Multi-Cycle
s/n 3748
Machine is equipped with Differential & Downfeed

This machine has been gone through and is operating properly
the machine can be inspected in our plant under power with
proper notice . see machine options below

Machine catalog specifications:
* Max. DP in Steel 6 DP-10 DP 
* Max. Work O.D. 16" 
* Max. Hob Slide Travel 16" 
* Diameter of Hole Through Work Spindle 3-1/8" 
* Max. Hob Diameter 5" 
* Max. Vertical Adjustment of Work Spindle 8" 
* Dist. C/L of Work Spindle to Underside of Overarm 8" 
* Dist. C/L of Work Spindle to C/L of Hob Spindle,
Max./Min 8.75"/0.75" 
* Dist. Face of Work Spindle to C/L of Hob Spindle,
Max./Min 19.5"/3.5" 
* Max. Hob Slide Swivel Angle Setting 45 Degrees 
* 9 Hob Speeds (when equipped with suitable gears) 59-246 RPM 
* Hob Feeds (when equipped with suitable gears) .0075-.1125" 
* Floor Space (approx.) L x W x H 82" x 38" x 76" 
* Weight (approx.) 7500 lbs

Machine Equipped With:
* Differential
* 2-Start index worm and Gear
* Automatic cycle control (Downfeed , Square, and Plunge)
* 1 Hob Arbor
* Tailstock Screw type
* Power 208/220 volt 3/phase
* 25-30 Change Gears
* Manual

Note: Machine can be inspected under power with Proper Notice.
Contact Rich Piselli at Rich@PiselliEnt.com to set up an inspection
or Visit our website at WWW.PiselliEnt.com to view this and other
Gear machinery!