PFAUTER CNC 6-Axis HORIZONTAL HOBBING MACHINE Model P400H / 4000. Retrofit and Rebuilt in 2006 Equipped with Fanuc 18I-MB CNC Controls This Machine is in excellent condition . It has been Retrofit and Rebuilt and equipped with fanuc cnc controls machine can be viewed under power or test part cut w/PO machine specifications are as follows: Maximum Face width 144" / 3659 mm Maximum center distance of part 184" / 4688 mm Maximum Diameter workpiece 18" / 458 mm Maximum Diameter workpiece swing 26" / 650 mm Minimum number of teeth to be milled 3 Maximum DP Milling 1 DP / 24 Mod Maximum DP Hobbing 1.5 DP/15 Mod Maximum worktable speed 10 RPM Max Dist between cutter & work spindle 12.87"/ 327mm cutter spindle taper 5 Morse Diameter of workspindle bore 8.07"/ 205 mm Maximum hob head swivel +/- 45 deg Maximum diameter Hob/milling cutter 11.2" / 285mm Maximum hob length 9.8" / 249 mm Cutter spindle speed range (infinite var) 25 - 150 RPM Main drive motor 20 HP / 15 kw Machine floor space 305" Long x 152" deep Machine height 86" tall Machine weight approx 38,000 lbs Machine is equipped with the following : Fanuc 18I-MB cnc 6 axis controls swing down operator pendant control w/14" color CRT Magnetic chip conveyor worm driven hob head dual anti backlash worm drive for table Adjustable tailstock w/ hyd. quill power rapid traverse for hob carriage 4 Jaw work head chuck several hob arbors coolant pump and tank set of leveling pads full books and manuals Machine software features the following cycles axial , radial, tang, diagonal & Climb Hobbing Crowning Single index skip feed automatic cut cycles w/ feed & speed changes electronic control hand wheel for easy positioning of all CNC Axis. Contact us today to set up an under power inspection on this excellent machine. call us to learn more about what it can do and other features it has. Or visit www.piselliEnt.com to view this machine and our vast inventory of late model gear machinery.