Muratec twin spindle turning centers MOdel MW 200 single gantry s/n Will advise (6 Available) These Muratec Twin Spindle turning center is equipped with a single Gantry loaders. The machines were in production but were removed from service recently, as the machines have been running production. Please see us for inspection. contact us for special Package pricing prior to removal only!! General Specifications:  Chuck Diameter x 2 10” Max. Work Diameter 14.9” Max. Turning Diameter 13.78” Max. Turning Length 5.51” Spindle RPM Range 24-3500 Spindle Nose A2-6 Spindle HP Each 30 HP Spindle Bore 2.48” Turret Positions x 2 10 Tool Shank Sizes 1.57” rd, 1.00” sq. X1 & X2 Travels 7.48” Z1 & Z2 Travels 7.48” Machine L x WH 93” x 93” x 83” Machine Weight 15,400 lbs Equipped With:  High Speed Gantry Loader 2 x Coolant systems  Rear Discharge Chip Conveyor  Hydraulic Chuck Cylinders (need to confirm)  Program Select Switch  Work Clamp Confirmation – Both Sides  note: Specifications were provided to us by a source that we assume to be reliable. It is incumbent upon the buyer to confirm specifications provided above. machines equipped as photographed Machines are sold cleaned and painted FOB Nueva laredo MX and can be inspected under power for and additional $5,000 hold back balance can be used to repair machines as needed and discussed Contact us today to inspect these machines today!! visit www.pisellient.com or call richard Piselli at 704 609-0766 to discuss in more detail or set up an inspection at rich@pisellient.com. we look forward to working with you !!