Barber Colman Horizontal Hobbing machine Model 16-36 type-A s/n 607 condition : good this machine is an A-frame style horizontal gear hobber for cutting long splines . the machine has flat ways , tailstock and hob arbor and a large bore through the spindle with change gears Machine specs are as follows : Machine specifications *Max DP in Steel...........................................6 DP-10 DP *Max Work OD...............................................16" *Max Hob Slide Travel......................................36" *Diameter Hole Thru Work Spindle...........................4-/1/8" *Max Hob Diameter..........................................5" *Max Distance Face of Work Spindle to Tailstock............46" *Max Vertical Adjustment of Work Spindle...................8" *Max Hob Slide Swivel Angle Setting-Degree.................45 degrees *9 Hob Speeds..............................................59-246 RPM *Hob Feeds.................................................0075-.1125" MACHINE IS EQUIPPED WITH: 1 Hob Arbor (1-1/4") Rapid traverse Manual hob shift tailstock with screw type center A-frame style machine 4 start index worm Face Plate Fixture on work spindle 11' diameter large bore through work spindle 4-1/8" Misc. Change Gears  Machine can be inspected under power with proper notice in our Statesville, NC facility! visit our site at www.pisellient.com to view more photos of this machine or get a formal quote. you can also contact Rich Piselli at rich@pisellient.com