Sold

gleason Model 104 straight bevel coniflex gear cutter , 8.5" diameter gears , uses rotary cutters, call for price before removal

BEVEL GEAR GENERATORS STRAIGHT
Manufacturer:
GLEASON
Model:
104 'CONIFLEX'
Condition:
Used - Excellent
Stock #:
16633949
gleason Model 104 straight bevel coniflex gear cutter , 8.5" diameter gears , uses rotary cutters, call for price before removal

gleason straight bevel gear generator
Model 104
s/n 105909
machine is loaded with tooling for additional charge

this machine cuts straight bevel gears utilizing rotary cutters . one of the rarest of machines
on the market today . can cut up to 8" diameter gears

Machine specifications are as follows:

CATALOG SPECIFICATIONS:
CONE DISTANCE(MAXIMUM)................. 4.25" (108MM)
CONE DISTANCE(MINIMUM)................. 0"(0MM)
PITCH ANGLE(MAXIMUM) 90 DEGREES........ 84DEGREES 18 MIN
PITCH ANGLE(MINIMUM)................... 5 DEGREES 42 MIN
EXTREME ANGLE (MINIMUM)................ 10:1
PITCH DIAMETER (MAXIMUM) RATIO 10:1.... 8.5" (216MM)
PITCH DIAMETER RATIO 1:1............... 6"
DIAMETRAL PITCH(COARSEST).............. 3DP (8.5 MODULE)
DIAMETRAL PITCH(FINEST)................ 20 DP (1.3 MODULE)
PITCH DIAMETER (MINIMUM) RATIO 1:1..... 6" (152MM)
DIAMETRAL PITCH (COARSEST)............. 3DP (8.5 MODULE)
DIAMETRAL PITCH (FINEST)............... 20 DP (1.3 MODULE)
FACE WIDTH (MINIMUM)................... 1-3/8" (35MM)
INDEX RANGE....................... 9-93 INCLUSIVE & MOST NO. S TO M175
PRESSURE ANGLES (DEGREES).............. 22,22.5,25 DEGREES
WORK SPINDLE TAPER HOLE (LARGE END).... 3-39/22" (100MM)
WORK SPINDLE TAPER PER FT.............. 39/64" (15MM)
DEPTH OF TAPER......................... 6"
SPINDLE HOLE DIAMETER THRU-BORE........ 2-7/16" (62MM)
SPINDLE NOSE TO MACHINE
CENTER................................. 1-1/2" TO 9" (3831-228.6MM)
CUTTER SPEEDS (FEET PER MIN)........... 98 TO 286
FEEDS (SECONDS PER TOOTH).............. 4.2 TO 69.2
MAIN MOTOR............................. 5HP 1800 RPM
HYDRAULIC PUMP MOTOR................... .75HP 1800RPM
COOLANT PUMP MOTOR..................... .5HP 3600RPM
FLOOR SPACE............................ 61.25"X84.25" (1556X2140MM)
MACHINE NET WEIGHT..................... 14,500 LBS (6.591 KGS)

Machine is equipped with the following
1 set up of change gears presently 0n the machine
1 set of cutter bodies for the machine
machine guarding (not photographed but included)
manual for operating machine and electrical drawings

contact us today as this machine will not last !!

This machine is equipped with lots of tooling and can be inspected.
Call us to discuss an inspection or schedule a visit,
got to WWW.PiselliEnt.com for more photos and/ or information on this
or other machine options

Loading...
Loading...
Loading...
Loading...