Reishauer Model RZ-400 CNC Gear Grinder, Generating style, 400mm cap, New 2005 delivered 2006

REISHUAER CNC GENERATING STYLE GEAR GRINDER
Model RZ-400
S/N 75079
New 2005 Installed new 2006

This machine grinds gears through generating style using a threaded worm wheel
for high speed grinding. This machine is also equipped with full filtration
system. The usual runs for this machine were between 30-50 piece lots.

Machine specifications are as follows: 
max. wheel diameter:.................................................400 mm 
gear width:..........................................................300 mm
max. module:..............................................................8
min. module:............................................................0,5
min. number of teeth:.....................................................5
max. number of teeth:...................................................999
total power requirement:..............................................205 A
workpiece weight max.:...............................................300 kg
helix angle:.........................................................+/- 45° 

Machine is equipped with the following:
Siemens 840D pendant control 
Tailstock 
Sensor indexing mechanism 
Reishauer dressing device with OD dresser
Oberlin filtration model OPF-4 and chilling system (New 2005)
Wheel flanges
Misc tooling for the machine
Full books and manuals

Machine can be inspected under power at customers facility under power.
Charts can be furnished upon request as well as part run-off if required
until machine has been disconnected. Machine will be available at the end
of the 4th qtr in 2020. Contact us today to set up an inspection! or visit
our Website at WWW.PiselliEnt.com to see our full gear machine inventory