2012 FELLOWS 2019-10-04

Machine Specifications Are As Follows:
Max pitch diameter (External)..................................................10"
Max pitch diameter (Internal) .................................................10"
Max face width, external & internal.............................................4"
Spindle Positioning Axis......................................................0-3''
Max diametrical pitch spur...................................................4 DP
Max diametrical pitch helical................................................5 DP
Bore through work spindle...................................................5.875"
Cutter spindle diameter.....................................................3.543"
Max helix angle with special guides........................................45 deg.
Distance between table & cutter (w/3" riser)...................................13"
Max. OD of fixture.............................................................19"
Dimensions (L x H x W)............................................91" x 105" x 72"
Machine net weight, approx.............................................13,000 lbs.

Equipment Features:
* Fanuc 32I-B 3-Axis CNC Control
* 20 HP spindle motor with programmable AC variable drive to control stroking speed
* Stroking speeds from 50-900; other SPM available upon request
* Standard spur guide.
* New X axis infeed system
* X axis absolute scale
* 1 Cutter spindle back off cam
* Remanufactured table group and upper saddle assembly
* X-Axis box ways reground and fitted
* Machine comes as a complete unit and requires minimal setup
* Work table surface reground
* New electrical cabinet with air conditioning system
* 3/4 HP coolant pump
* 1-set documentation (hydraulic, electrical, mechanical)

Control Features:
* C-Axis work table rotation
* X-Axis work table infeed
* B-Axis cutter spindle rotation
* Programmable stroking speeds
* Cutter at top feature
* Custom Macro screens for easy conversational programming
* One to five cuts can be selected
* Segment cutting
* Single index and/or slot cutting
* Sizing cycle feature used to make corrections to the size of a part without
running through a complete multi cut cycle
* Part programs can be stored in nonvolatile memory with up to 15 characters
* RS-232, S Ram, and Ethernet communication ports

Options on Machine:
* Special SWING-AWAY Tailstock/ Pinion Support
* 3" Riser Assembly
* 3/4 Cabin Enclosure with Interlock Safety Guarding

Note: all this work was done in 2012 when machine was delivered  Remanufactured
"Like New"as machine has very low hours only 557 Hours!! 

Hydraulic System:
* Integral to the machine providing lubrication and pressures for tailstock and
work clamping if required
* Trabon lubrication system with feedback sensors for lube pulse monitoring

** Machine is complete and ready to run. Available for Immediate Delivery!!

** Call to set up an under power Inspection NOW!!

*** Not a nicer machine on the Market Today!!!
Call 704 609-0766 to set up an Inspection!