1996 LORENZ LS-424

Machine Specifications are as follows:
Max Module................................................................8
Max Face width (Spur Gear)............................................120mm
Max Stroke length...................................................0-137mm
Stroke Position adj Range.............................................160mm
-Max tip diameter - External..........................................420mm
-Max tip diameter - Internal..........................................370mm
Max clearance from top of table.......................................500mm
Table Diameter (6-slots)..............................................400mm
Hole in Table.........................................................125mm
Spindle diameter......................................................100mm

Stroke Rate:
standard stroke drive - range #1.........................25-200 strokes/min
- range #2........................100-800 strokes/min
Note: Stroke ranges are infinitely variable between stroke ranges Feeds:
Rotary Feed range..............................................4800mm/min
-corresponding to 25 strokes per/min...................0.048-192mm/stroke
-corresponding to 800 strokes per/min...................0,0015-6mm/stroke
Radial Feed range..............................................2400mm/min
corresponding to -25 strokes per/min....................0.002-96mm/stroke
-800 strokes per/min................0.0000063-3mm/stroke
Rotary Power Traverse..............................................19 RPM
Radial Power Traverse.........................................2400 mm/min
CNC axis Controlled:
X-Axis Radial movement of worktable slide
C-Axis Rotary movement of cutter spindle
D-Axis Rotary movement of work table
Z-Axis Stroke positioning setting
L-Axis stroke length setting (L-axis available only with Z-axis)
Main Motor...............................................16.5 Kw (3200rpm)
Connected Load.....................................................45 KVA
Machine Weight....................................................8500 kg

- Machine is equipped with the following:
H&K 783s 5 axis CNC Controller
CNC programmable panel screen on main electrical panel
200 mm Riser Block
Spur Guide cutter adaptors program in inch and metric
hyd table clamping table
splash guarding books and Manuals

- Machine can be inspected in customers plant for a short time only before
removal call to set up an inspection or receive machine catalog on file!!