2006 MAZAK INTEGREX E-800VLL

MACHINE SPECIFICATIONS:

Stroke:
* X Axis 1100mm
* Y-Axis 800mm
* Z-Axis 900mm
* B-Axis 150(-30+120)
* C-Axis 360 degrees

Capacity:
* Max Machining Diameter 730mm
* Max Workpiece 730mm x 1000mm
* Pallet Size 500x500
* Table load capacity 1940lbs

Turning Spindle And Table:
* Max Speed 1000RPM
* Rapid Traverse Rate 100 rpm
* Min Indexing angle increment 0.0001
* Indexing Time .09 sec/90 degrees

Machining Spindle:
* Max Spindle Speed 12000
* Spindle Taper NO. 40
* Spindle Bearing ID 80mm (3.15)
* Spindle Acceleration 3.2sec(0~12000rpm)
* Rapid Traverse Rate B Axis 50RPM
* Min indexing angle increment B Axis .0001
* Indexing Time .05sec/ 90 Degrees

Feedrate:
* Rapid Traverse Rate(x,y,z,axis) 50000mm/min(1968 IPM)
* Cutting Feedrate(x,y,z) 50000mm/min(1968IPM
Automatic Tool Changer
* Tool Shank Cat 40
* Pullstud ANSI
* Tool Magazine Capacity 120 Tools
* Max Tool Diameter/Length(from gauge line)/Weight 95mm,400mm,12KG
* Max Tool Diameter w/ Adj.Tool Pockets Empty 150mm
* Tool Selection Method Shortest Path
* Tool Change Time 8 seconds

Automatic Pallet Changer:
* Number Of Pallets 4
* Pallet Change Time 10 Seconds
* Change System Rotary Type

Motors:
* Table Motor(30min/Cont Rating) AC30/22Kw(40/30HP)
* Machining Spindle Motor(15 min rating) AC 22kW (30HP)
* Coolant Pump Motor(50Hz/60Hz) 2.2/3.0 Kw

Electrical And Air Requirements:
* Electrical Power Supply(30min./Cont. Rating) 75.7KVa/64Kva
* Air Supply Pressure .5Mpa /700L/min(72PSI)
* Coolant Tank Capacity 960L

Machine Size:
* Machine Height 3435mm
* Required Floor space 3679mm x 7550mm
* Machine Weight 21000kg 46296lbs Machine Equipped With:
* Matrix Control
* Thru spindle coolant
* Tool eye automatic
* Workpiece air blast
* 3-D coordinate conversion
* 120 tool changer
* Mill Turn/Mazatrol software
*Dia 600MM Pallet w/3 Jaw Chuck/Scroll X2
*Chip Conv Rear Disp Consep
* Laser measurement system for rotary tool
* 4 pallets
* Prep for flash tool