1997 MITSUBISHI GD-30

Mitsubishi 6-Axis CNC Gear hobbing machine
Model GD-30 
With Fanuc 18-IM controls
New 1997

This Mitsubishi Gear hobbing machine was purchased from an excellent quality machine group. Machine has just been removed from the the customers facility as it has been shut down. The machine was cutting parts up until its removal today of 2/11/19

PRINCIPAL SPECIFICATIONS: 
Maximum work-piece diameter 12" /300mm 
Maximum diametrical pitch/module 6 dp/(8M) 
Maximum swiveling angle +45o 
Minimum number of teeth 5 
Maximum number of teeth 1000
Center distance hob spindle to work spindle 
-Maximum 11.8 " (300mm)
-Minimum 1.57" (40mm) 
Maximum radial travel 10.6" (270mm) 
Max. height work table to center of hob spindle 23.6" (600mm) 
Min. height work table center to hob spindle center 7.9" (200mm) 
Maximum axial travel 15.7" (400mm) 
Programming unit English (inch) 
Distance between worktable and tailstock
-Maximum 29.1" (740mm) 
-Minimum 13.4" (340mm)
Worktable diameter 11.8" (300mm) 
Maximum worktable speed 60 rpm 
Maximum hob size: Diameter 5.9" (150mm) Length 9.1" (230mm) 
Maximum hob shift 7.1" (180mm) 
Hob speed range 75-750 rpm 
Feed rate: 
 Axial - inch/min. (mm/min.) 0.04-39.4" (1-1,000mm) 
 Radial - inch/min. (mm/min.) 0.04-39.4" (1-1,000mm) 
 Rapid traverse Axial - inch/min. (mm/min.) 393.7" (10,000mm) 
 Radial - inch/min. (mm/min.) 393.7" (10,000mm) 

Machine is equipped with the following:
Fanuc model 18-IM CNC controller
Chip conveyor 
Coolant Tank & Pump
Electrical cabinet (attached)
full guarding with auto door
hob arbor 
safety switches & lighting
Books & Manuals

Machine can be inspected under power in our statesville plant location with proper notice

please conact us to receive more detailed machine specifications or current photos of machine in our facility In Statesville North Carolina!