Gleason Model 463 hypoid gear grinder

Gleason hypoid gear grinder
Model 463 s/n 108605
excellent condition

MACHINE SPECIFICATIONS:
Max Cone Distance (30-Degree Spiral Angle w/12" Dia Wheel) 15"/(381mm)
Maximum Pitch Angle, 90-Degree Shaft 70-DEGREES
Minimum Pitch Angle, 90-Degree Shaft 5-DEGREES
Maximum Pitch Diameter: (90-Degree Shafts):
0-degree spiral angle, 1:1 ratio 15.5"/(393.7mm)
0-degree spiral angle, 3:1 ratio 23"/(584.2mm)
30-degree spiral angle, 1:1 ratio 21"/(533.4mm)
30-degree spiral angle, 3:1 ratio 31.5"/(800.1mm)
40-degree spiral angle, 1:1 ratio 22.5"/(571.5mm)
40-degree spiral angle, 3:1 ratio 34"/(863.6mm)
Coarsest DP (Module) 2 DP
Coarsest DP (Module) (Metric) (12.7-Module)
Maximum Face Width 3"/(76.2mm)
Work Spdl Taper Hole Dia.(Large End) 3-19/32"
Work Spindle Bore Taper (Per Ft)39/64"
Work Spindle Thru-Hole Diameter (98mm)
Std Grind Wheel OD 6"-8"
Std Grind Wheel OD (Metric) (1852-203mm)
Max. Wkhead Offset Above/Below Ctr 4.5"
Max. Wkhead Offset A/B Ctr (Metric) (114.3mm)
Distance From Machine Center To Spindle Nose 3"-20.5"
Distance From Machine Center To Spindle Nose mm (76-500mm)
Feed Rate (Seconds Per Tooth) 1.9-11.8
Approx. Floor Space 135" x 81"
Approx. Floor Space (Metric) (3429x2057mm)
Approx. Overall Machine Ht 97"
Approx. Overall Mach Ht (Metric) (2464mm)
Approx. Machine Net Weight 23,000 LBS.
Approx. Machine Net Weight (Metric) (10,455 kg's)

Machine Equipped With:
* Small wheel head attachment
* 1 Set-Up of Change Gears

Machine can be inspected in our statesville NC warehouse
contact us at rich@pisellient.com or www.pisellient.com on line
for a detailed quote and pricing