Gleason Model 26 Gear Quenching Press, up to 28" diameter gears

Gleason Quench Press
Model 26
s/n 32355

EQUIPMENT / FEATURES:

• power in/out moving die-carrier shuttle table
w/receiver-plate
• self contained pneumatic power system with valves
• built-in oil circulation pump with controlled, variable quench-oil flow
• sundry electrics (motors/controls)
• nearly complete set of universal lower die-rings (TBD)
• die area shroud and splash guard
• pilot and spreader
• set of splash guards, covers, hoses, piping
• operator’s manual, wiring diagrams

PRINCIPAL SPECIFICATIONS:

Diameter of pilot 3”
Angle of expander on pilot 20°
Outside diameter of upper die 25”
Outside diameter of lower die 27”
Distance from bottom of upper die
Holder to top of lower die holder:
Open 21”
Closed 6-7/8” min.
Machine oil capacity 300 gal.
Size of oil inlet 2” pipe
Size of oil outlets 3” pipe
External oil supply required:
Gallons per minute, approximately 40
Air Supply:
Compressed air pressure required:
Free air per minute, approximately 35 cu.
Air storage tank capacity required 40 cu. ft.
Air line pressure recommended, approx 90 lbs
Size of air inlet ¾”
Pump motor 10 HP, 3600 RPM
Torque motor 200 inch lbs, 600 RPM
Machine weight without oil 10,250 lbs
Gross shipping weight 10,750 lbs
Floor space required 44” x 80”
Machine overall height 88”

These are catalog specs only and machine needs to be inspected to
confirm all information . equipment and tooling as described. this
is only a guide

contact us today to set up an inspection at our statesville NC facility
or visit our website at WWW.Pisellient.com to see our other gleason
Gear machines in stock .
thank you

rich@pisellient.com
WWW.PiselliEnt.com
704 609-0766