Gleason Model 108 Hypoid Generator for cutting gears up to 8.5" diameter. excellent aerospace machine

Gleason Hypoid generating Machine
Model 108 s/n will Advise
Machine condition is Excellent
From Aerospace MFG group

This universal Hypoid gear generating machine is an automatic, Hi-speed
machine for cutting spiral bevel, Zerol bevel & Hypoid gears up to a
5 1/4" Cone Distance. Inspect this machine in excellent mechanical
condition .

Diametral pitch (coursest) DP 4 6.34 mod
Cone distance Maximum
-(30° spiral angle and 7½” cutter) 5¼” 133 mm
Workhead angle -12° to 90°
Extreme ratio Any practical ratio
Min ratio for pinions to operate w/Formate gears 2 to 1
Maximum gear pitch dia (30° spiral angle)
-10 to 1 ratio 8½” 216 mm
-2 to 1 ratio 7½” 190 mm
-1 to 1 ratio 6” 152 mm
Face width maximum 1¼” 32 mm
Number of teeth 5 to 97 and most numbers up to 175

WORK SPINDLE:
Diameter of taper hole at large end 3.29/32” 100 mm
Taper per foot 39/64” 15 mm
Depth of taper 6” 150 mm
Diameter of hole through spindle 2.7/16” 62 mm

CUTTER DIAMETERS : 3½”, 6” and 7½”/
89 mm, 150 mm and 190 mm

FEEDS AND SPEEDS :
Cutter speeds (feet per minute) 74 to 380 22.5 to 115.3 meters per minute
Feeds (seconds per tooth) 3 to 68.6

ELECTRICAL EQUIPMENT:
Main motor 3 Hp 1800 rpm
Hydraulic motor ¾ Hp 1800 rpm
Coolant motor ½ Hp 3600 rpm

MISCELLANEOUS:
Floor space 62 x 85” 1600 x 2200 mm
Net weight 16000 lbs 7800 kgs

• * Gears cut by Single Cycle and Cyclex methods,max 4DP and 8” pitch dia.
• ** Limited by cutter diameter and number of blades.

This machine can be inspected on the west coast in customers warehouse
as it has just been removed from Power. Machines are equipped with good
assortment of gears and tooling and machines are equipped as photographed
contact us today to inspect the machines as they come from an Aerospace
Gear Mfg plant which makes exceptional quality gearing. we can load in
containers for a nominal fee and ship to your nearest Ocean port.
visit WWW.PiselliEnt.com for more photos and info or email Rich@pisellient.com