Gleason Model 17A-4000 spiral bevel Gear testing machine

Gleason Universal Hypoid Bevel Gear Testing Machine
Model 17A-4000
s/n 603916
Excellent Condition

This Machine is suitable for the testing of straight bevel, spiral bevel,
and hypoid gears with shafts intersecting at 90-degrees, with capacity
to test gears up to 20" (508mm) pitch diameter
The machine corresponds to the attached copy of factory literature,
featuring the following:

EQUIPMENT / FEATURES:

• hydraulic work chucking cylinders on pinion
and gear spindles, (less draw-in bar & nuts)
• 5-HP, 220/440 volt, 3-phase 60 cycle, 1670 rpm main drive motor
• 3/4 HP, 220/440 volt, 3-phase 60 cycle, 1745 rpm hydraulic motor
• pre-set backlash control
• brake spindle (2-19/64” bore dia. large end)
• adjustable drive pinion spindle (3-29/32” bore dia. large end)
w/crank handle & graduated dial
• load meter
• guards, covers, handwheels
• full complement of electrics, motors/controls)
• operator’s manual wiring diagram & parts list

PRINCIPAL SPECIFICATIONS:

Maximum offset of gear spindle above
or below center of pinion spindle ……………………………….3.5” (88.9mm)
Maximum distance from center of gear spindle
to nose of pinion spindle ……………………………………. 12” (304.8mm)
Minimum distance from center of gear spindle
to nose of pinion spindle ……………………………………. 6” (152.4mm)
Maximum distance from center of pinion
spindle to nose of gear spindle: ………………………………. 7.75” (196.85mm)
Minimum distance from center of pinion spindle
to nose of gear spindle ………………………………………….. 4.13” (104.8mm)
Max. diameter of gear with “zero” offset of gear spindle.. 20” (508mm)
Machine dimensions (approx.) …………………………………… 60”x 73”x 60”
Machine net weight ……………………………………………… 5,300 Lbs.

Machine can be inspected in our NC Facility under power with proper notice
contact us today to set up an inspection or call for more photos or video
of the machine under power if unable to travel. we have a trained technician
who understands the gleason equipment on staff for assistance and questions
you may have. Visit WWW.PiselliEnt.com to view this machines and others in
stock. we await your request for quote at RICH@PiselliEnt.com