Gleason Model 641 G-Plete Bevel cutting Generating machine , for up to 16" diameter gears excellent condition

Gleason Bevel Generating machine
Model 641 G-Plete
s/n will advise
condition : Excellent

Machine is used to mfg bevel gears by the Generating method
up to 16" diameter capacity. This machine is well equipped
and can be inspected under power in Excellent condition !! .

SPECIFICATIONS:
EXTREME RATIO 10:1
ROOT ANGLE RANGE -8° TO 90°
GEAR DIAMETER – MAXIMUM 16.000" (406.40MM)
EXAMPLES OF MAX. GEAR PITCH DIAMETERS WITH 35"
GEAR SPIRAL ANGLE AND MAX. CUTTER DIAMETER ( )
AT THE FOLLOWING RATIOS : (USING 12″ CUTTERS)
1 X 1 13.500" (342.90MM)
2 X 1 16.000" (406.40MM)
5 X 1 16.000" (406.40MM)
MAXIMUM RADIAL SETTING 6.983" (177.40MM)
DIAMETRAL PITCH – COARSEST 2.0 DP (12.70 MOD)
FULL DEPTH – MAXIMUM 1.000" (25.40MM)
FACE WIDTH – MAXIMUM 2.600" (66.00MM)
INDEX RANGE 5 TO 10 INCLUSIVE
WORK-SPINDLE DIAMETER OF TAPER HOLE
AT LARGE END 3-29/32" (99.22MM)
TAPER PER FOOT 39/64″ (15.48MM)
DEPTH OF TAPER 6" (152.40MM)
DIAMETER OF HOLE THROUGH SPINDLE 3.0625" (77.79MM)
CUTTER DIAMETER(S) UTILIZED 2.75", 3.75", 4.5", 6", 7.5", 9″,10.5″,12" (100,125,160,200,250,300MM)
CUTTER SPEEDS 15 – 250 RPM
CYCLE TIME INFINITELY VARIABLE FROM 4.5 SECONDS/TOOTH – MINIMUM
WORKHEAD SETTINGS
OFFSET ABOVE CENTRE - MAXIMUM 2.25" (57.15MM)
OFFSET BELOW CENTRE – MAXIMUM 2.25" (57.15MM)
MACHINE CENTRE TO NOSE OF SPINDLE – MAXIMUM 14.50″ (368.30MM)
ELECTRICAL EQUIPMENT 60 HZ (50 HZ)
CUTTER DRIVE MOTOR (10/5 HP) 1800/900 RPM (1500/750 RPM)
HYDRAULIC MOTOR (3 HP) (1200 RPM)
HYDRAULIC MOTOR (5 HP) (1500 RPM)
COOLANT MOTOR (1.5 HP) (900 RPM)
COOLANT MOTOR (2 HP) (1000 RPM)
D.C. GENERATING DRIVE MOTOR (6 HP) 1200 RPM
DIMENSIONS / WEIGHT:
FLOOR SPACE (INCLUSIVE OF HYDRAULIC UNIT,
ELECTRICAL PANEL & CHIP REMOVAL SYSTEM) 131″ X 85″ (333 X 216CM)
HEIGHT 83″ (211CM)

This machine can be inspected in Excellent condition in customers
facility under power prior to removal . we recommend our machines to
Be inspected prior to purchasing . visit www.pisellient.com to see
more photos and information if required . contact us today for formal
quotation and discussion on other similar machines.