Barber Colman horizontal hobber
Model 16-56
s/n 3442R
Machine recently moved to our statesville Plant location
Suitable for the cutting of spur gears, pinions, splines, and
other work pieces of similar profile up to 16"pitch diameter
and 56" face width.
Delivered New 1974 Serial # 3442R
PRINCIPLE SPECIFICATIONS:
Maximum rated work dia 16"
Coarsest pitch, one cut in steel 6 D.P.
Work spindle bore 4 1/8"
Maximum travel of hob carriage 56"
Maximum dist work spindle face to C.L. of hob spindle
Min. 3 1/2"
max. 59 1/2"
C.L. work spindle to C.L. of hob spindle
Min. 1/2"
max. 8 1/2"
Maximum hob dia. 5"
Hob Speed 425 RPM
Feed ranges .015 to .150 i.p.r.
Maximum swivel angle setting, L or R 45 degrees
Approximate floor space 122" x 38"
Approximate height 76"
Approximate net weight 10,000 LBS.
EQUIPMENT FEATURES:
- Automatic Lubricating System
- Assortment of Change Gears (25-30)
- Standard Hob Slide W/Swivel Hob-Head ( /- 45 Degrees Swivel)
- Anti-Friction Bearing Hob-Head
- Dwell timer
- Standard Over Arm Support W/Adjustable Lever-Type Tailstock W/Center
- One (1) Hob Arbor
- Two start Thread Index Worm
- Power Rapid Traverse For Hob Carriage
- Complete Coolant System, Pump Tank & Piping
- Full Complement Of Electrics (Motors/Controls)
Note: Machine has been completely gone through , disassembled and bearings
replaced where needed. parts and adjustments made as wneeded during rebuild
repair process .
Machine can be inspected in our statesville plant under power.
visit our website for more photos of this machine www.pisellient.com
contact us to receive a formal quote and pricing or see our vast inventory
