Gould & Eberhardt Gear Hobbing Machine
Model 48H Special Hi-Column
s/n 7035A1
This Universal (Hi-Column) G&E Gear hobbing machine is an excellent Job Shop machine.
It is equipped with differential, Infeed, tailstock and standard Universal hob head.
Machine specifications & features correspond below. Machine has been gone through!
Machine Specifications are as follows
*Max Rated Diametral Pitch.............................................2 DP
*Face Capacity-Spur and Pinion Gears....................................40"
*Face Capacity-45 Deg Helical Gear......................................36"
*Max Diameter-Spur Gear with Support....................................36"
*Max Diameter-spur Gear with no Support.................................46"
*Min Centers Work and Hob Arbors.........................................4"
*Max Diameter Hob........................................................8"
*Hob Speed...........................................................37-235
*Diameter Work Table....................................................32"
*Diameter of Hole in worktable...........................................8"
*Max Clearance height above table under tailstock.......................56"
*Net Weight (Full Equipment).....................................21,925 lbs
MACHINE EQUIPPED WITH:
*Universal Model H Bevel Drive Hob Head
*Differential
*Infeed
* 20/N
*(1) Hob ArborĀ
*Change Gears
*Pushbutton Controls
*Swing-away Tailstock w/ overarm
*Operators Manual
Machine can be inspected under power in very good running condition in our
Statesville, NC shop. machine has been gone through and adjusted . visit our
Website at WWW.PiselliEnt.com to request a formal quote or see our Inventory.
you can contact Rich Piselli at Rich@PiselliEnt.com to set up an inspection