Barber Colman Model 16-16 , 16" diameter x 16" part length, 6 DP., dual lead worm, 3-1/8" hole through the work spindle , 1-1/4" hob arbor, good running condition
Barber Colman horizontal hobbing machine
model 16-16
s/n 3231-R
Machine catalog specifications:
* Max. DP in Steel 6 DP-10 DP
* Max. Work O.D. 16"
* Max. Hob Slide Travel 16"
* Diameter of Hole Through Work Spindle 3-1/8"
* Max. Hob Diameter 5"
* Max. Vertical Adjustment of Work Spindle 8"
* Dist. C/L of Work Spindle to Underside of Overarm 8"
* Dist. C/L of Work Spindle to C/L of Hob Spindle,
Max./Min 8.75"/0.75"
* Dist. Face of Work Spindle to C/L of Hob Spindle,
Max./Min 19.5"/3.5"
* Max dist of shaft from spindle face - tailstock 30" approx
* Max. Hob Slide Swivel Angle Setting 45 Degrees
* 9 Hob Speeds (when equipped with suitable gears) 59-246 RPM
* Hob Feeds (when equipped with suitable gears) .0075-.1125"
* Floor Space (approx.) L x W x H 82" x 38" x 76"
* Weight (approx.) 6500 lbs
Machine Equipped With:
* 2-Start index worm and Gear
* 1 Hob Arbor (1-1/4")
* Auto hob Hob shift (TBD)
* Tailstock-
* Power 440 volt 3/phase
* 25-30 Change Gears
* Manual
Note: Machine can be inspected under power with Proper Notice.
Contact Rich Piselli at Rich@PiselliEnt.com to set up an inspection
or Visit our website at WWW.PiselliEnt.com to view this and other
Gear machinery!
We use cookies to improve your experience. Privacy Policy.