Gleason Model P200S CNC Gear Shaper 200mm diameter capacity , with tilting column option & Tailstock New 2007

Gleason Pfauter vertical CNC Gear shaper
Model P200S
s/n 13320 6020714
New 2007 delivered 2008
W/ Programmable tilting column option w/ Tailstock

This machine can be inspected under power with proper notice for a
short time only prior to removal . Get you best pre-removal price
Now. machine can be inspected under power overseas in Korea, inquire !!

Machine Catalog specs are as follows:
Nominal Work Piece Diameter Int / ext. 7.9" / 200 mm (..)
Maximum workpiece swing diameter 16" / 400 mm (...)
Maximum Diametral Pitch/ Module 5 NDP/ 5 Module (.)
Maximum Stroke Length (optional) 2.17" (4.33") / 55mm (110mm)
Maximum Face Width (optional) 2.00" (4.00") / 50mm (99mm)
Cutter Spindle Diam. (optional) 3.35" (3.74") / 85mm (95mm)
Cutter Spindle Stroke speed (optional) 180-1800 SPM (130-1300 SPM)
Tilting column angle -0 to 12 degrees
Maximum Helix angle w/ cutter Diam 125mm +/- 45 degrees
Center dist. cutter spindle-work spindle -1.97/ 7.9" -50mm/+200mm
Axial Slide position Range 5.9" 150mm
Column inclination Range (optional) 0-12 degrees
Column Lateral offset +/- 0.98" +/-25mm
Cutter Locating taper HSK-B63
Total Power Rating 65 kVA
Machine Weight Approx 11,000 kg

Machine is equipped with the following :
Siemens 840D control
Tilting column option (B-Axis)
pinion support & Tailstock
180 position loading station
chip conveyor
oil chiller
full guarding
cutter adaptor

Special Machine payment terms for Eaton SLP:
95% down with order and prior to shipment
5% balance due when eaton SLP receives the machine

Machine has already been packed for export! .
visit us on-line at WWW.Pisellient.com or contact Rich Piselli at
rich@pisellient.com contact us for video NOW