Gleason Model 6 universal , Split head gear tester REBUILT BY Piselli ENT INC , Excellent s/n 25233

Gleason Universal gear tester
Model 6
split head type
REBUILT BY Piselli ent inc 2024
s/n 25233

Machine is Being rebuilt in our shop , New spindle bearings installed
excellent condition !!! contact us today !!!

Model No. 6 GLEASON Combination Hand Rolling and Power Angular
Hypoid Bevel Gear Tester .suitable for the testing of both the
rolling qualities, and the tooth spacing and concentricity of bevel
and hypoid gears of any shaft angle up to 7.5" (190.5mm) diameter

The machine would correspond to the below copy of factory literature,
featuring the following:

EQUIPMENT / FEATURES:

• standard two-speed, 2-HP/1-HP, 440 volt, 3-phase
50/60 cycle, 1800/3600 rpm drive motor w/pulleys & belts
• two-speed drum switch
• forward/reverse spindle rotation
• precision dial indicator for pinion head
• manual braking system for load simulation
• spring chucking mechanism (both spindles)
(less/draw-rods & nuts)
• standard 1-51/64” diameter pinion spindle bore (#12-Taper)
• standard 1-51/64” diameter gear spindle bore (#12-Taper)
• full complement of electrics (motors/controls)
• operators manual, parts list, wiring diagrams

PRINCIPAL SPECIFICATIONS:

Maximum diameter of gears 7.5" (190.5mm)
Range of angles 0 to 180 degrees
Range of pinion offset: (above center) 1-1/4" (31.49mm)
(below center) 1-1-4" (31.49mm)
Max./Min. Distance pinion spindle
center to nose of gear spindle 7"/0" (177.8/0mm)
Max./Min. Distance gear spindle center
- to nose of pinion spindle 7"/1" (177.8/25.4mm)
Diameter of spindle hole (large end) 1-51/64"(45.64mm)
Taper of spindle per ft. 1/2" (12.7mm)
Depth of taper 3" (76.2mm)
Diameter of hole through 1-5/16" (33.337mm)
Floor space required 37" x 42" (940x1067mm)
Machine net weight 1,900 lbs. (863.6 kGs)

TERMS: Net Cash w/formal purchase order, before shipment

DELIVERY: Machine ready for immediate delivery

equipped with special cam style chuck

contact rich piselli for more info and pricing
at Rich@Pisellient.com or request formal quote here on line at
www.piselliEnt.com