Liebherr Model LC-80 7-Axis CNC Gear hobber W/ 180 Position Loader. 80 mm Max Diameter workpiece. The machine(s) are new in 2005 and were utiiezed with National pick and place loaders. Machines have been purchased due to a total plant shut down! 2 available
Liebherr 7-Axis CNC Gear Hobbers Model LC-80 New 2005 s/n 0414 & 0422 condition : very good (2 available) These machines were mfg high quality gears when total plant was shut down. the machines were running parts up until that point. The are equipped with 180 position loaders and Siemens 840D cnc controls motors and drives. Machine Specifications are as follows: Max workpiece Diameter 80 mm / 3.5" Table Diameter 125 mm / 5" Max Table speed 800 1/ min Center distance range 10-200 mm Max Axial Travel 250 mm cutter head swivel =/- 45 degrees Max tailstock travel 75 mm Machines are equipped with the following: Siemens 840D CNC controller and drives 180 position loader (around tailstock) loading station In & Out part shoot for load and unload Mayfran Magnetic chip conveyor Machines have been removed from mfg location and can be inspected in our warehouse. the machines are exactly the same and are equipped as above. Machines have been well maintain and have been producing good quality parts. Contact rich Piselli to set up a quick inspection or visit the machines at our warehouse we look forward to making a deal prior to removal. See more pictures of these machines at WWW.PiselliEnt.com or Email Rich Piselli at rich@PiselliEnt.com !!